Start with the product you need and your contact details. A drawing, sample, dimensions, or application brief is helpful but not required — we will clarify technical gaps after the first reply.
Simple Project Entry
Four basic details — no finished drawing required
Prototype Control
Fit and dimensions reviewed before production release
Repeat Supply Records
Approved geometry and process references retained
Product / Application / Project / Guidance
Enter the Site by What You Already Know
A buyer with a drawing needs a different route from someone still comparing materials. Choose the closest starting point and move directly to the useful information.
Product or material known
Start from the product family
Compare silicone and rubber development paths, constructions, materials, and the inputs buyers normally prepare.
Compare product pathsApplication or conditions known
Start from the operating context
Choose by coolant, charge air, turbo intake, heater circuit, fluid media, temperature, pressure, or routing.
Choose applicationDrawing, sample, or dimensions ready
Open the project now
Send four basic details first. Drawings, photos, samples, dimensions, and technical conditions can be attached now or shared later.
Start your inquiryDirection is not clear yet
Use the buyer guide library
Find material, application, supplier-selection, and RFQ preparation guidance before deciding what to request.
Find the right guideSilicone & Rubber Hoses Developed to Your Specification
No standard catalog. Development starts from your drawing, sample, or application requirement.
All ProductsSilicone Hoses
Developed from drawing or sample in straight, elbow, reducer, Y-piece, corrugated, and multi-layer configurations. Primary material for cooling circuits, charge air plumbing, and turbo intake applications.
- Single to multi-ply reinforcement lay-up
- Complex elbow, reducer, and multi-bore geometry
- Prototype sign-off before production commitment
Rubber Hoses
EPDM, NBR, HNBR, AEM, CR, and FKM rubber hoses for coolant circuits, air handling, thermal management, and fluid transfer. Compound and construction selected for your media, temperature, and routing requirements.
- Mandrel-formed and extruded constructions
- Media-fit compound selection included
- EPDM for coolant / NBR, HNBR, CR, AEM, and FKM for media-specific requirements
Custom-developed geometry / formed silicone / non-standard routing path
Custom Geometry
Non-standard routing forms built from your drawing or sample
Compound bends, multi-angle elbows, reducers, Y-pieces, corrugated flex zones, and branch connections. Every geometry starts from your requirement, not a catalog form.
Submitted & Developed Not Picked From a Catalog
2D drawing, 3D file, reference sample, or dimensional sketch can open a project. Compound and construction are reviewed before commitment. Prototype sign-off and repeat-supply records are handled by project.
Submission to outcome / specific, not marketing
Cooling System
Charge Air
Turbo Intake
Repeat-Order Control
Tooling records retained
Per-batch dimensional baseline held on file
Compound traceability
Same formulation confirmed across production runs
Batch QC documentation
Dimensional and visual records available on request
Bring a Drawing, Sample, or Application Requirement.
Share geometry, media, temperature, and routing conditions. We review and respond with a specific material and construction recommendation.
What Helps at Inquiry
More context allows a faster, more specific response.
Hose type & application
Cooling, charge air, turbo, heater, fluid transfer
Shape & routing geometry
Drawing, sketch, or reference sample
Media, temperature & pressure
Enables material & construction selection
Buyer type & target market
OEM, aftermarket, or industrial
Volume estimate
Determines tooling, process route, and MOQ